XR SERIES
Power, performance and price points
- 5 models of affordable pro amplification
- Parallel | Stereo | Bridge modes
- Switchable input sensitivity 0.775V or 1.4V
- Huge toroidal transformers
- Comprehensive protection circuitry
- All steel construction
- XLR Link outputs
- Power choices from 200 w to 1000 w per channel into 8 Ω
XR800
2 x 300 watts at 4 Ohm
- 2 channels
- 8 Ohm 2 x 200 Watts
- 4 Ohm 2 x 300 Watts
- 8 Ohm Bridged 1 x 600 Watts
- Class AB
XR1500
2 x 450 watts at 4 Ohm
- 2 channels
- 8 Ohm 2 x 330 Watts
- 4 Ohm 2 x 450 Watts
- 8 Ohm Bridged 1 x 900 Watts
- Class H
XR2500
2 x 750 watts at 4 Ohm
- 2 channels
- 8 Ohm 2 x 500 Watts
- 4 Ohm 2 x 750 Watts
- 8 Ohm Bridged 1 x 1500 Watts
- Class H
XR3000
2 x 1000 watts at 4 Ohm
- 2 channels
- 8 Ohm 2 x 700 W
- 4 Ohm 2 x 1000 W
- 8 Ohm Bridged 1 x 2000 W
- Class H
XR3500
2 x 1350 watts at 4 Ohm
- 2 channels
- 8 Ohm 2 x 1000 W
- 4 Ohm 2 x 1350 W
- 8 Ohm Bridged 1 x 2700 W
- Class H level 3
Compare The Series
XR series are built around a massive heavy-duty toroidal transformer.
This delivers smooth and consistent power into the amplifier electronic circuits, resulting in stable and reliable output power, even in environments where AC may fluctuate.
An XR series amplifier features comprehensive protection circuitry. This ensures that no matter what problems might exist with external cabling, AC power or loudspeakers, the amplifier will protect itself, and its surroundings.
Front panel LED’s give immediate and clear feedback to the situation. Should an external fault occur, the red LED ‘Fault’ light will illuminate and the amp will go into Protection mode. A rear panel ‘Reset’ button is then available to reset the amplifier once the external fault has been diagnosed and removed.
Handy ‘Clip’ LED’s are also visible from the front panel. Even from a distance, its simple and clear to see and understand the status of the amp.
Around the back of the XR are the balanced inputs and outputs along with configuration switches.
A handy feature are the 2 x XLR link outputs which allow for easy ‘daisy chaining’ of multiple amps – removing the need for external patching or excessive cabling.
Around the back is also the input sensitivity switch selectable between 0.775v or 1.4v.
The main ‘Bridge / Stereo / Parallel’ mode switch is also on the rear. STEREO mode makes the two channels work independently. CH1 input signal goes to CH1 output and CH2 signal goes to CH2 output. BRIDGE mode makes CH1 input signal go to the BRIDGE output socket. This is controlled by using the CH1 volume control. PARALLEL mode makes CH1 input signal go to both CH1 and CH2 output sockets. The input socket of CH2 has no effect. The channel volumes can be adjusted independently.
| Name | Type | Size | File |
|---|---|---|---|
| XR Series User Manual | User Manual | 3 MB | Download |
In The Air
Configure vertically and deploy as a ‘traditional’ flying array. The optional WLA-1 Common Fly Frame ensures stability and that flying is easy.
On The Ground
The optional SP-4 pole easily connects the 21″ sub to the tops. Dual angle 35 mm pole sockets in the full range elements makes angle adjustments safe and easy.
Horizontal
The optional WLA-1 Link hardware connects three elements of either WLA-112 or WLA-115 to create a 3 unit horizontal array with 60 H x 100 V dispersion
