[user_country]
Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors
post
page
product

REASON-X SERIES

Reasons to be cheerful...1, 2, 3....

PRODUCT SERIES

REASON-X12

500 W AES (RMS)

REASON-X15

600 W AES (RMS)

REASON-X18B

1000 W AES (RMS)

REASON-X218B

2000 W AES (RMS)

Compare The Series

OVERVIEW

Reasons to be cheerful, 1…2….3

A THREE-WAY SYSTEM – with matching subs.

Built exclusively to deliver incredible sonic definition at high volumes, Reason-X series brings new concepts and new qualities to become the premium pro audio loudspeaker series in the Wharfedale Pro portfolio.

The full range models (X12 and X15) feature an all-new Polyethylene flat diaphragm neodymium HF. This highly engineered Z38 HF compression driver brings extreme HF clarity. Enormous cooling fins disperse the heat generated and the unique 1.5 inch ring-shaped polyethylene flat diaphragm delivers a precious feeling of space and air to high frequencies.

The 100° x 70° waveguide is also rotatable, making Reason-X suitable for high quality installations and touring.

The mid-range comes from a custom Wharfedale Pro 8” driver with an aluminium basket and ferrite magnet and it delivers a warmth and clarity. Meanwhile, the LF driver boasts a 3.0” voice coil and large φ190mm ferrite magnet. This 3-way combination gives the Reason series full range models a frequency response and audio definition that simply has to be experienced.

The series is completed by 2 subwoofers. A single 18” and a floor destroying 148dB Max SPL dual 18”. New LF drivers have been created which feature NOMEX spiders for extreme suspension and durability. 4.0” voice coils and a newly designed aluminium basket make these LF transducers impossible to describe in words – they need listening to instead!

All models are constructed of premium birch and use thick steel front grilles for extreme durability.

REASON-X SERIES.
Put simply…3 is better than 2 !

The driver inside the Reason-X subwoofer has some very special features.

∮102.6 diameter voice coil.
(Thats OVER 4.0″ but we say 4.0″ because of number rounding)
Double-layer spider bonding.
Updated mute glue is used. This bonding can eliminate brittle cracking and reduces harmonic distortion.
112 g Membrane.
The Reason-X subwoofer driver has a heavier membrane which can withstand more power without breaking.
31 mm voice coil cavity.
A larger internal cavity for the coil windings allows Reason-X to have lower response by 5 Hz.
6.2 ohm impedance.
The impedance peak is higher in the Reason-X driver at 35 Hz. This results in superior low end strength.

The full range models (X12 and X15) feature an all-new Polyethylene flat diaphragm neodymium HF.  This highly engineered Z38 HF compression driver brings extreme HF clarity.

Enormous cooling fins disperse the heat generated and the unique 1.5 inch ring-shaped polyethylene flat diaphragm delivers a precious feeling of space and air to high frequencies.

Advanced HF compression driver technology which deliveries breathtaking results.

A handy feature is the rotatable waveguide which allows Reason-X full range models to be used in the vertical or horizontal plane.

100° x 70° 

OR 

70° x 100° – the Horizontal and Vertical dispersion can easily be changed.

With dedicated drivers for each of the main bandwidths, 3-way systems bring enhanced frequency definition to the listening experience.
Each driver focused solely on its optimum frequency range.

A big picture!  

Enjoy the 3-way space and definition !

NameTypeSizeFile
EASE Library V7.5 Software110.4 MB Download
Wharfedale Pro Preset Library Software1.48 MB Download
REASON-X Series Data Sheets Data Sheets3 MB Download
REASON-X Series User Manual User Manual3 MB Download
REASON-X18B / REASON-X218B User Manual User Manual3 MB Download
REASON-X12 / REASON-X15 User Manual User Manual3 MB Download
REASON-X12 / REASON-X15 User Manual (German) User Manual3 MB Download
CASE STUDIES
WARNING
To avoid causing damage to your amplifier, please read all of the included instructions before updating.

By continuing, you confirm that:
• This update is intended only for compatible amplifier models
• Installing on unsupported devices will result in permanent malfunction
• Failure to follow the included instructions is your responsibility
Scroll to Top