| Specification | Value |
|---|---|
| Active or Passive | Active |
| System Type | Array Element |
| Configuration | 2-way |
| System Continuous Power | LF: 700 W / HF: 100 W |
| System Peak Power | LF: 1400 W / HF: 200 W |
| Max SPL @ 1m | 133 dB |
| Freq Response (+/-3 dB) | 55 Hz – 20 KHz |
| Freq Range (-10 dB) | 50 Hz – 20 KHz |
| Bi-amp Mode Switch | No |
| Bluetooth | No |
| IP Certification | None |
| Driver Brand | Wharfedale Pro |
| LF Driver Size | 2 x 10" |
| LF Magnet Material | Ferrite |
| LF Frame Material | Aluminium |
| LF Voice Coil Size | 2.5” |
| HF Driver Type | Compression Driver |
| HF Voice Coil Size | 3” |
| HF Diaphragm Material | Titanium |
| HF Exit Size | 1.4″ |
| HF Power (RE:AES2-2012) | 90 W |
| HF Rated Impedance | 8 Ω |
| Preset Library | No |
| Input Connector | Balanced Socket XLR |
| Waveguide Type | EVO-Fold |
| Enclosure Material | Birch Plywood |
| Grille Material and Finish | Steel |
| Finish | Black Tough-Tone |
| Handles | 4 |
| Deployment | Flying, Ground |
| Pole Mount | None |
| Brackets Included | Yes |
| Rigging | Yes |
| Integral Rigging | 3 Points |
| Nominal Coverage (H x V) | 100° x System dependant |
| Sensitivity 2.83 V / 1 m | 101 dB |
| Crossover Frequency | 1.5 KHz |
| Amplifier design | Class D |
| Driver Protection | Independent LF/ HF RMS, Peak Limiters and DC |
| Thermal Protection | Amplifier Shut Down. Auto Reset |
| DC and Short Protection | Yes |
| Signal Processing | DSP Based, 8 FIR Presets |
| Power On Protection | Power switch on/off mute |
| Low Line Voltage Shut Down | 60% Nominal Line Voltage |
| DC and Short Protection | Yes |
| Limiter Indicator | Red LED |
| Signal Indicator | Green LED |
| Power/Active Indicator | White LED |
| Find Function Indicator | Blue LED |
| Active loudspeaker Input Impedance | Balanced: 10 KΩ |
| Link Connector | Balanced Pin XLR |
| Input sensitivity | +4 dBu |
| Max input level | +18 dBu |
| Update | USB Type B |
| Network (RS485) | RJ45 |
| AC Input Connector | powerCON |
| AC Loop Through Connector | powerCON |
| Main Power | AC 100-120 V~ and 220-240 V~, 50/60 Hz Automatic |
| Power Supply | High Efficiency Switching Mode Power Supply |
| Included Accessory | User Manual, WLA-RH4 Rain hood |
| Unpacked - Front Height (mm) | 314 |
| Unpacked - Rear Height (mm) | 190 |
| Unpacked - Width Front (mm) | 760 |
| Unpacked - Width Rear (mm) | 760 |
| Unpacked - Depth (mm) | 503 |
| Packed - Height (mm) | 870 |
| Packed - Width Front (mm) | 410 |
| Packed - Width Rear (mm) | 410 |
| Packed - Depth (mm) | 600 |
| Weight - Nett (kg) | 40.44 |
| Weight - Gross (kg) | 44.32 |
WLA-210A
Dual 10" active line array element with EVO-Fold
WLA-210A
Dual 10" active line array element with EVO-Fold
WLA-210A is a dual 10″ active line array system that redefines clarity, control, and output power through advanced acoustic and digital engineering. Designed and engineered in the UK, it combines innovative hardware design with intelligent DSP processing, making it ideal for both touring and fixed installations.
At its core are two custom Wharfedale Pro 10″ LF drivers and a 3.0″ HF compression driver coupled to the acclaimed EVO-Fold waveguide. Paired with precision-engineered phase plugs, this design ensures a smooth, coherent response across the listening field with minimal phase interference.
An internal 800 W continuous amplifier drives the system, supported by 8 integrated DSP presets with FIR filtering, allowing fast and accurate configuration for any array size or venue. Remote DSP control via RS485 offers full GUI-based tuning and monitoring of every element in the system.
Delivering up to 133 dB max SPL @ 1 m, the WLA-210A combines power, precision, and flexibility—setting a new benchmark for compact active line array performance.
OVERVIEW
| Specification | WLA-210A | WLA-210SUBA | WLA-218BA |
|---|---|---|---|
| Catch Line | Dual 10" active line array element with EVO-Fold | Dual 15″ active subwoofer with internal DSP and presets | Dual 18″ active subwoofer with internal DSP and presets |
| Active or Passive | Active | Active | Active |
| System Type | Array Element | Subwoofer | Subwoofer |
| Configuration | 2-way | Bass-reflex | Bass-reflex |
| System Continuous Power | LF: 700 W / HF: 100 W | 2000 W | 2000 W |
| System Peak Power | LF: 1400 W / HF: 200 W | 4000 W | 4000 W |
| Max SPL @ 1m | 133 dB | 145 dB | 148 dB |
| Freq Response (+/-3 dB) | 55 Hz – 20 KHz | 39 Hz-125 Hz | 30 Hz-100 Hz |
| Freq Range (-10 dB) | 50 Hz – 20 KHz | 35 Hz - 163 KHz | 25 Hz - 150 Hz |
| Driver Brand | Wharfedale Pro | Wharfedale Pro | Wharfedale Pro |
| LF Driver Size | 2 x 10" | 2 x 15" | 2 x 18" |
| LF Magnet Material | Ferrite | Ferrite | Ferrite |
| LF Frame Material | Aluminium | Aluminium | Aluminium |
| LF Voice Coil Size | 2.5” | 4″ | 4″ |
| HF Driver Type | Compression Driver | ||
| HF Voice Coil Size | 3” | ||
| HF Diaphragm Material | Titanium | ||
| HF Exit Size | 1.4″ | ||
| HF Power (RE:AES2-2012) | 90 W | ||
| HF Rated Impedance | 8 Ω | ||
| Input Connector | Balanced Socket XLR | Balanced Socket XLR | Balanced Socket XLR |
| Waveguide Type | EVO-Fold | ||
| Enclosure Material | Birch Plywood | Birch Plywood | Birch Plywood |
| Grille Material and Finish | Steel | Steel | Steel |
| Finish | Black Tough-Tone | Black Tough-Tone | Black Tough-Tone |
| Handles | 4 | 2 | 4 |
| Deployment | Flying, Ground | Flying, Ground | Ground |
| Brackets Included | Yes | Yes | Yes |
| Rigging | Yes | Yes | |
| Integral Rigging | 3 Points | ||
| Nominal Coverage (H x V) | 100° x System dependant | ||
| Amplifier design | Class D | Class D | Class D |
| Driver Protection | Independent LF/ HF RMS, Peak Limiters and DC | RMS, Peak Limiters and DC | RMS, Peak Limiters and DC |
| Thermal Protection | Amplifier Shut Down. Auto Reset | Amplifier Shut Down. Auto Reset | Amplifier Shut Down. Auto Reset |
| DC and Short Protection | Yes | Yes | Yes |
| Signal Processing | DSP Based, 8 FIR Presets | DSP Based, 8 FIR Presets | DSP Based, 8 FIR Presets |
| Power On Protection | Power switch on/off mute | Power switch on/off mute | Power switch on/off mute |
| Low Line Voltage Shut Down | 60% Nominal Line Voltage | 60% Nominal Line Voltage | 60% Nominal Line Voltage |
| Limiter Indicator | Red LED | Red LED | Red LED |
| Signal Indicator | Green LED | Green LED | Green LED |
| Power/Active Indicator | White LED | White LED | White LED |
| Find Function Indicator | Blue LED | Blue LED | Blue LED |
| Active loudspeaker Input Impedance | Balanced: 10 KΩ | Balanced: 10 KΩ | Balanced: 10 KΩ |
| Link Connector | Balanced Pin XLR | Balanced Pin XLR | Balanced Pin XLR |
| Input sensitivity | +4 dBu | +4 dBu | +4 dBu |
| Max Input Level | +18 dBu | +18 dBu | +18 dBu |
| Update | USB Type B | USB Type B | USB Type B |
| Network (RS485) | RJ45 | RJ45 | RJ45 |
| AC Input Connector | powerCON | powerCON | powerCON |
| AC Loop Through Connector | powerCON | powerCON | powerCON |
| Sensitivity 2.83 V / 1 m | 101 dB | 108 dB | 109 dB |
| Crossover Frequency | 1.5 KHz | Preset Dependent | Preset Dependent |
| Main Power | AC 100-120 V~ and 220-240 V~, 50/60 Hz Automatic | AC 100-120 V~ and 220-240 V~, 50/60 Hz Automatic | AC 100-120 V~ and 220-240 V~, 50/60 Hz Automatic |
| Power Supply | High Efficiency Switching Mode Power Supply | High Efficiency Switching Mode Power Supply | High Efficiency Switching Mode Power Supply |
| Included Accessory | User Manual, WLA-RH4 Rain hood | User Manual, WLA-RH2 Rain hood | User Manual |
| Unpacked - Front Height (mm) | 314 | 485 | 560 |
| Unpacked - Rear Height (mm) | 190 | 485 | 560 |
| Unpacked - Width Front (mm) | 760 | 760 | 1065 |
| Unpacked - Width Rear (mm) | 760 | 760 | 1065 |
| Unpacked - Depth (mm) | 503 | 775 | 756 |
| Packed - Height (mm) | 870 | 595 | 655 |
| Packed - Width Front (mm) | 410 | 855 | 840 |
| Packed - Width Rear (mm) | 410 | 855 | 840 |
| Packed - Depth (mm) | 600 | 870 | 1150 |
| Weight - Nett (kg) | 40.44 | 68.62 | 86.8 |
| Weight - Gross (kg) | 44.32 | 85.52 | 87.7 |