KMD7

5 Diverse Models

KM series are designed to provide exceptionally clear, articulate sound with excellent off-axis rejection for high gain before feedback in a live environment. The range consists of a variety of condenser and dynamic microphones. Combined the series as a whole works exeptionally well for drum kits, however each microphone performs as an individual also working as vocal and instrument mics in their own right.

The KMD-7 pack consists of two KM3's, a KM4 and four KM5's to provide a one stop drum microphone solution suitable for live and home studio use.

Key Features

  • Combination of Condensers & Dynamic Mics
  • High tech zinc finish
  • 5 diverse models
  • Unidirectional polar responses
  • Neodymium magnets (Except KM-3)
  • Dent-resistant steel grilles
  • Single and multipacks available
  • Rugged cast Zinc alloy body
  • On/off switch
  • Gold-plated XLR connectors


 

  • Combination of Condensers & Dynamic Mics
  • High tech zinc finish
  • 5 diverse models
  • Unidirectional polar responses
  • Neodymium magnets (Except KM-3)
  • Dent-resistant steel grilles
  • Single and multipacks available
  • Rugged cast Zinc alloy body
  • On/off switch
  • Gold-plated XLR connectors


 

Pickup the signal, not the noise
The KM Series Microphones include feature super-cardioid & cardioid patterns to minimize feedback and to reject signals not originating in front of the microphone.
KM3 - Overhead
The KM3 is an end address small diaphragm condenser intended for use as a drum overhead microphone however it is equally suited to many other applications such as stringed instruments and piano. Two KM3's are supplied for stereo overhead coverage and come complete with a rubberized shockmount to ensure handling noise is minimized.
KM4 - Low end dynamic
The KM4 like the other dynamic models in the range utilize a neodymium magnet to provide exceptional low distortion at high output levels. Primarily designed for kick and tom applications it is also at home when used on bass, brass and amplifier cabinets.
KM5 - dynamic
The four KM5 microphones have a spring loaded adjustable drum-rim mounting bracket that ensures perfect positioning for snare and tom applications. The intelligent rim mounting ensures that the microphone will operate effectively and safely out of the range of sticks and beaters; in addition there is a cable tidy to ensure wiring is neat, tidy and safe.

SPECIFICATIONS

KM-3
Transducer Type Condenser
Polar Pattern Cardioid
Frequency Response 30 Hz - 20 kHz
Load Impedance <1000 Ohms
Sensitivity (@ 1000Hz) -46 dBV/Pa
Off Axis Rejection >18dB
Maximum SPL >120dB
S/N Ratio more than 70dB
Current Consumption 4.6mA
Power Supply 11-52V phantom power
Connector 3 pin gold plated male XLR
Polarity Positive voltage on pin 2 relative to pin 3 of output connector
Housing Zinc Alloy
Dimensions Ø30mm x 154mm x Ø21mm
Weight 120g (4.2oz)
KM-4
Transducer Type Dynamic
Polar Pattern Super-cardioid
Frequency Response 30Hz - 12kHz
Load Impedance 250 Ohms
Sensitivity (@ 1000Hz) -54 dBV/Pa
Off Axis Rejection >20dB
Maximum SPL >135dB
Connector 3 pin gold plated male XLR
Polarity Positive voltage on pin 2 relative to pin 3 of output connector
Housing Zinc Alloy
Dimensions Ø58.6mm x77.8mm x Ø27mm
Weight 240g
KM-5
Transducer Type Dynamic
Polar Pattern Super-cardioid
Frequency Response 50Hz - 16kHz
Load Impedance 250 Ohms
Sensitivity (@ 1000Hz) -54 dBV/Pa
Off Axis Rejection >22dB
Maximum SPL >130dB
Connector 3 pin gold plated male XLR
Polarity Positive voltage on pin 2 relative to pin 3 of output connector
Housing Zinc Alloy
Dimensions Ø45.2mm x 61.3mm x Ø24mm
Weight 170g

Download

Products