DVP-X12M

ROAD-READY LOUDSPEAKERS SPECIFICALLY DESIGNED FOR HARDWORKING PERFORMERS

DVP X12M is tough. 

The cabinets are protected by proprietary enhanced Rhino Rock paint which means these loudspeakers will look as good as new even after many successful tours, parties and events.

Special attention has been paid to the port and port mouth to ensure a huge bass output with detail and minimised distortion. The port mouth on the DVP X12M is parallel to the ground. This creates a reflective boundary which results in low end punch from a smaller cabinet.


Key Features


  • 300W RMS / 600W Programme / 1200W Peak
  • 129dB Max SPL
  • 55Hz – 20kHz frequency response
  • Proprietary enhanced Rhino Rock paint for a chip resistant finish

  • Parallel port mouth design creates reflective boundary, maximising low end punch.
  • Extended-range IRIS X Titanium dome compression driver
  • High powered LF driver using a double-roll surround 
  • Fine-tuned crossovers, built in house for audio signal purity and optimised tuning 
  • HF limiters are installed for thermal protection against extreme power input 

  • 300W RMS / 600W Programme / 1200W Peak
  • 129dB Max SPL
  • 55Hz – 20kHz frequency response
  • Proprietary enhanced Rhino Rock paint for a chip resistant finish

  • Parallel port mouth design creates reflective boundary, maximising low end punch.
  • Extended-range IRIS X Titanium dome compression driver
  • High powered LF driver using a double-roll surround 
  • Fine-tuned crossovers, built in house for audio signal purity and optimised tuning 
  • HF limiters are installed for thermal protection against extreme power input 
DOUBLE ROLL SURROUND & DRIVER TECHNOLOGY
DVP X12M floor monitors use the latest in Wharfedale Pro driver technology: For the LF driver, engineers have incorporated a curvilinear, double-roll surround for smooth mid-high transitions and stability for low through to mid range frequencies. Combined with 2.5” voice coils for improved thermal dissipation, you can expect consistent delivery at the highest of volumes throughout a performance.

The 44mm Diaphragm HF IRIS X compression driver used on the X12M is equally robust in design – using a solid aluminum rear plate, the HF driver is strengthened for durability and heat is dissipated efficiently during prolonged time periods.

Wharfedale Pro engineers have also selected a 90° x 60° elliptical waveguide optimised for wide coverage in multiple venues while touring."
ACOUSTICALLY MATCHED CABINET
The cabinet of the DVP X12M has been developed to work in perfect harmony with the advanced drive units within. Special attention has been paid to the acoustic properties of the port and port mouth to ensure a huge bass output with detail and minimised distortion.

The port mouth lies parallel to the ground, creating a reflective boundary effect to guarantee low-end delivery even in a smaller cabinet formation. This port has been tuned individually to maximise low-end punch.

DVP X12M is coated in the latest generation chip-resistant, Rhino Rock paint.
FINE-TUNED CROSSOVER
The crossovers ensure perfect integration between the drive units and acoustic properties of the cabinet. Electronic components are carefully selected, while over-complex networks have been avoided to maintain a pure and strong audio signal.

Engineers have fine tuned the crossover points for vocal intelligibility and tuned the high frequencies for long-throw to ensure clear coverage right to where you need it."
IRIS X DRIVER TECHNOLOGIES

The coil size and electrical sensitivity of a loudspeaker transducer is critical to its performance.  DVP-X loudspeakers now include our proprietary IRIS X design which delivers Increased coil Radius and Increased electrical Sensitivity.  The radius of the coil ensures smooth heat dissipation during prolonged high volume use, while the increased electrical sensitivity ensures that the transducer converts as much electrical power into sound output as the laws of physics allow.  

A hot transducer wastes energy, risks damage and distorts.  IRIS X reduces this through improved heat dissipation and improved efficiency.

In real-world terms, IRIS X transducers deliver higher SPL with less distortion.  They lead the market with specifications and are designed and built entirely within Wharfedale Pro.

Increased Radius Increased Sensitivity

SPECIFICATIONS

Model Name DVP X12M
System Type Passive
Configuration Two-way
Frequency Response (+/- 3dB) 60-18kHz
Frequency Range (-10dB) 55-20kHz
Sensitivity (2.83v/1m) 98dB
System Rated Impedance
Calculated Maximum SPL @1m 129dB
Low Frequency Transducer
Size 305mm / 12"
Voice coil size 65mm / 2.5”
Rated Impedance
LF Power (re:AES-2012) 300w
HF Transducer
HF Driver Type IRIS X Compression Driver
Voice Coil Size 44mm / 1.75"
Exit Size 25mm / 1"
Diaphragm Material Titanium
Rated Impedance
HF Power (re:AES2-2012) 40w
Nominal Coverage (H x V) 90°x60°
Nominal Impedance
Power
System Continuous Power 300w
System Programme Power 600w
System Peak Power 1200w
Crossover Frequency 2.2kHz
Hardware 2 x NL4 (speakON compatible) + 1/4" Jack combo
_
2 carry handles
Enclosure
Enclosure Material and finish MDF / Highest grade Rhino Rock
Colour Options black paint
Grille Material & Finish Steel
Dimensions - Unpacked
Height 428mm / 16.9"
Width Front 359mm / 14.1"
Width Rear 359mm / 14.1"
Depth 537mm / 21.1"
Dimensions - Packed
Height 396mm / 15.6"
Width Front 573mm / 22.6"
Width Rear 573mm / 22.6"
Depth 448mm / 17.6"
Weight
Net Weight 17.4kg / 38.2lbs
Gross Weight 20.5kg / 45.1lbs
Products