WPM-1

Extra monitoring at your fingertips

The WPM-1 is possibly the simplest yet effective way to achieve a clear monitoring signal, for all kinds of musicians. A microphone stand-mount receptacle and front-panel controls offer complete control to the musician with the ability to adjust volume and EQ so effortlessly adjustments could even be made during a gig. It fits in seamlessly into large and small PA setups without affecting the FOH signal so users can use independently without interfering with the main mix.

Key Features

  • 5" woofer
  • 75W RMS / 150W Programme
  • 120Hz - 18kHz
  • Easy solution for extra monitoring for any musician
  • Microphone, line/instrument and aux inputs
  • Microphone thru, line and mix outputs
  • Independent master and auxiliary level controls
  • Ultra lightweight gas assisted injection moulded enclosure
  • Dual angle micstand receptacles and microphone mounting system
  • IEC power supple
  • Switchable output sensitivity


 

  • 5" woofer
  • 75W RMS / 150W Programme
  • 120Hz - 18kHz
  • Easy solution for extra monitoring for any musician
  • Microphone, line/instrument and aux inputs
  • Microphone thru, line and mix outputs
  • Independent master and auxiliary level controls
  • Ultra lightweight gas assisted injection moulded enclosure
  • Dual angle micstand receptacles and microphone mounting system
  • IEC power supple
  • Switchable output sensitivity


 

Multi-fit Mic receptacle
The monitoring system can be mounted to a combination of boom stand adaptors or normal upright microphone stands independently using the provided stand adapter and boom arm mount adaptors. The polypropylene molded cabinet of the WPM-1 makes a lightweight, portable speaker solution, which also is very safe on mounting to microphone stands. It’s ergonomic front tweeter section is covered in a solid grille, with the tweeter section doubling up as a convenient carry handle.
Keep the main mix unaffected
The WPM-1 has a microphone thru so the signal to send to your mixing. This means musicians can happily change the WPM-1 setting throughout their performance to their taste without causing unwanted level changes to the main mix being sent to the front of house.
Multiple inputs for all instruments
The WPM-1 has versatile line, mic and auxiliary level inputs so the speaker system can be used for keyboards, microphones and guitars alike.

SPECIFICATIONS

System Type Fullrange
Frequency Response @ +/- 3dB 120Hz - 18kHz
Peak SPL 114dB
Power (Continuous / Programme) 75W / 150W
Low Frequency Transducer 5"
Mic EQ Peak +/-15dB @ 2.1KHz
Inputs 1 x XLR,2 x 6.3mm Jack
Outputs 1 x XLR,2 x 6.3mm Jack
Mix Output Pre / Post Switchable
Dimensions (H x W x D) 285mm x 315mm x 330mm

Download

Products